Remote Battery Switch

Made of: Stainless steel

Pack: 1 x Skinpack

Single pole battery switch. Copper contacts. Removable handle.

For systems up to 24 V.

Eexterior Ø 58mm.

Rating: Continuous 150 A - Intermittent 1000 A. (5 seg.)

Battery Selector Switch made of reinforced polycarbonated housing.

Tin-platted copper stud terminals. Case design allows panel or surface mounting. Voltage rating: 48V DC maximum.

With alternator field disconnect AFD (BS9004-BS9002-BS5510-BS5511).

Features: ON/OFF Circuit

Pack: 1 X blister

Dimensions: 98x98 mm

Pack: 1 x Blister

Applications:

1 = Switches battery bank 1 or battery bank 2 or battery bank 1and 2 to all loads using one switch.

Coil voltage: 24V

Pack: 1 x Blister

Automatically combines large batteries banks for high current charging and isolates under discharge.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Features: Dual circuit

Pack: 1 x Blister

1 = Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch.

2 = Switches circuits of different voltages, such as 12V and 24V simultaneously with one simple ON/OFF switch.

Features: 24V

Pack: 1 x Box

Contactor Single Pole, Single Throw.

Dimensions: 99x89x50 mm

Pack: 1 x Blister

Automatically combines batteries during charging and isolates batteries when discharging and starting engines.

Rating: Continuous: 120 A. - Intermittent: 210 A.

Features: Dual Circuit Plus

Pack: 1 x blister

Applications:

1 = Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery.

2 = The COMBINE BATTERIES funcion offers the ability to combine two battery banks in the event of a low battery.

Features: Selector

Pack: 1 x Blister

Applications: 

1 = Switches battery bank 1 or battery bank 2 or battery bank 1 and 2 to all loads using one switch.

Fixe Handle

Pack: 1 x Skinpack

Single pole battery switch made of polycarbonate and non-corrosive marine grade metals.

Dimensions base: 67 x 67 mm.

Rating: Continuous 250 A. - Intermittent: 350 A.

Dimensions:

Distance between holes: 100 mm

Pack: 1 x Skinpack

Single pole battery switch manufactured in brass and high impact plastic. Copper contacts. Removable handle.

For systems up to 24 V.

Rating: Continuous 250 A. - Intermittent 2500 A. (5 seg.)

Set 18 labels

Removable Handle

Pack: 1 x Skinpack

Single pole battery switch made of polycarbonate and non-corrosive marine grade metals.

Dimensions base: 67 x 67 mm.

Rating: Continuous 250 A. - Intermittent: 350 A.

Features: 24V

Pack: 1 x Box

Contactor Single Pole, Single Throw.

Features: 24V

Pack: 1 x Box

Contactor. Monoblock Single pole Double Throw.

Features: 12V 150A

Pack: 1 x Box

Heavy Duty DC battery disconnecting switches.