Inside Ø: 40 mm
Pack: 1 x bag
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Made in stainless steel AISI-316.
Tube length: 200mm.
This shop uses cookies and other technologies so that we can improve your experience on our sites. |
|
Pack: 1 x skinpack
Gasket and flip-up cap.
For NSP12588
3 and 5 days withing the EU, up to 10 days elsewhere.
Can be returned or exchanged, with conditions.
No customer reviews for the moment.
Inside Ø: 40 mm
Pack: 1 x bag
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Made in stainless steel AISI-316.
Tube length: 200mm.
Inside Ø: 41 mm = 1-5/8"
Pack: 1 x skinpack
Vertical flush mount, with hard black plastic liners and flip-up cap. Chrome plated bronze flange and stainless steel tube.
Tube length: 230mm.
Length: 20 cms
Pack: 1 x bag
Made in black plastic support and foam retainer. For 3 rods.
For rods: 40 mm
Pack: 1 x bag
Adjustable rod holder. Made in stainless steel with rubber protector. For hand rails or pulpits of 25 mm.
Tube length: 360 mm.
For: 3 rods
Pack: 1 x bag
U.V. stabilized white plastic with s.s. mounting hardware.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Deck mount.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Side mount.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Rail mount.
For rods: 40 mm
Tube length: 250 mm
Pack: 1 x bag
Adjustable rod holder. Made in chromed brass with rubber protector. For gunwale or transoms up to 100mm.
Inside Ø: 41 mm = 1-5/8"
Pack: 1 x skinpack
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Polished stainless steel flange and stainless steel tube.
Tube length: 210mm.
Pack: 1 x skinpack
Drain barb cup for remote drainage of the above rod holders
Description: Spring
Pack: 1 x skinpack
Spare parts for rod holders.
Mounting: Rod holder mount
Bait board made from high density food grade polypropylene. May be mounted in rod hold holder or hand rails.
Adjustable angle mount leg.
Size: 46 x 37 cms.
Packed 1 per box.
Chrome plated brass with inclination every 15 degrees. Rectangular base with 4 holes for fixing. Complete with gasket for the cane.It can be extracted and placed with a single “click”
Dimension: A-62mm, B-90mm, H-55mm, l1-40mm, l2-68mm
For rods: 40 mm
Pack: 1 x bag
Chromed brass side mount rod holder, with rubber protector.
Inside Ø: 40 mm
Pack: 1 x bag
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Made in stainless steel AISI-316.
Tube length: 200mm.
Inside Ø: 41 mm = 1-5/8"
Pack: 1 x skinpack
Vertical flush mount, with hard black plastic liners and flip-up cap. Chrome plated bronze flange and stainless steel tube.
Tube length: 230mm.
Length: 20 cms
Pack: 1 x bag
Made in black plastic support and foam retainer. For 3 rods.
For rods: 40 mm
Pack: 1 x bag
Adjustable rod holder. Made in stainless steel with rubber protector. For hand rails or pulpits of 25 mm.
Tube length: 360 mm.
For: 3 rods
Pack: 1 x bag
U.V. stabilized white plastic with s.s. mounting hardware.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Deck mount.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Side mount.
For rods: 40 mm
Pack: 1 x bag
Made of black ABS. Rail mount.
For rods: 40 mm
Tube length: 250 mm
Pack: 1 x bag
Adjustable rod holder. Made in chromed brass with rubber protector. For gunwale or transoms up to 100mm.
Inside Ø: 41 mm = 1-5/8"
Pack: 1 x skinpack
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Polished stainless steel flange and stainless steel tube.
Tube length: 210mm.
Pack: 1 x skinpack
Drain barb cup for remote drainage of the above rod holders
Description: Spring
Pack: 1 x skinpack
Spare parts for rod holders.
Mounting: Rod holder mount
Bait board made from high density food grade polypropylene. May be mounted in rod hold holder or hand rails.
Adjustable angle mount leg.
Size: 46 x 37 cms.
Packed 1 per box.
Chrome plated brass with inclination every 15 degrees. Rectangular base with 4 holes for fixing. Complete with gasket for the cane.It can be extracted and placed with a single “click”
Dimension: A-62mm, B-90mm, H-55mm, l1-40mm, l2-68mm
For rods: 40 mm
Pack: 1 x bag
Chromed brass side mount rod holder, with rubber protector.
Inside Ø: 40 mm
Pack: 1 x bag
Angled (65º) flush mount, with soft black plastic liners and flip-up cap. Made in stainless steel AISI-316.
Tube length: 200mm.
Inside Ø: 41 mm = 1-5/8"
Pack: 1 x skinpack
Vertical flush mount, with hard black plastic liners and flip-up cap. Chrome plated bronze flange and stainless steel tube.
Tube length: 230mm.
Length: 20 cms
Pack: 1 x bag
Made in black plastic support and foam retainer. For 3 rods.
For rods: 40 mm
Pack: 1 x bag
Adjustable rod holder. Made in stainless steel with rubber protector. For hand rails or pulpits of 25 mm.
Tube length: 360 mm.
For: 3 rods
Pack: 1 x bag
U.V. stabilized white plastic with s.s. mounting hardware.