For:
Inlet Ø: 140 mm
Outlet Ø: 146 to 168 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Shipment and delivery
3 and 5 days withing the EU, up to 10 days elsewhere.
Return policy
Can be returned or exchanged, with conditions.
For:
Inlet Ø: 102 mm
Outlet Ø: 108 to 130 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Ø mm: 50
Pressure: 4 bar
Aspiration: 0,8 bar
Radius bend: 150 mm
Length supply: 30 mts.
Steel wire PVC transparent hose. For fresh water and food liquids.
Temp.: – 10º C + 60º C.DM 21/3/73 - CEE 90/128.
Ø: 16x26 mm
Pressure: 10 bar
Radius bend: 160 mm
Length supply: 40 mts.
Softwall rubber hose suitable for hot water and steam mix. Used where an atoxic hose is required. Suitable to scald with steam up to 164ºC.
Temp. – 40º C + 120º C
Burst pressure : 30 bars
Meets or exceeds: DM 21/3/73 - 18/6/79 & FDA
SAE size: 80
Width band: 120 - 140 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Ø mm: 32x44
Pressure: 10 bar
Radius bend: 320 mm
Length supply: per meter
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
For:
Inlet Ø: 152 mm
Outlet Ø: 159 to 180 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
For:
Inlet Ø: 32 to 52 mm
Outlet Ø: 45 to 66 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
In. Ø: 1-1/8" = 29 mm
Length: 15 m
Pack: Box
Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Not recommended for below waterline thru-hull connections.
Warranty: 1 year
Ø: 19x26 mm
Radius bend: 110 mm
Length supply: 50 mts.
Rubber hose suitable for delivery of water, non corrosive fluids and air.
Temp.: – 30º C + 80º C.
Working pressure : 10 bars
Burst pressure : 30 bars
Meets or exceeds: ISO R1307.
Ø mm: 45x59
Pressure: 10 bar
Radius bend: 450 mm
Length supply: per meter
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
For:
Inlet Ø: 83 to 89 mm
Outlet Ø: 96 to 117 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Length: 300 mm
Width band: 4,45 mm
Pack: 25 x Bag
Stainless steel AISI-316 ball-lock tie.
Ø: 35x46 mm
Radius bend: 210 mm
Length supply: per meter
Hardwall smooth cover rubber hose, for suction and delivery if water and non corrosive fluids.
Temp.: – 30º C + 80º C.
Working pressure : 10 bars
Burst pressure : 30 bars
Vacuum : 0.9 bars
Ø: 12x17 mm
Pressure: 12 bar
Radius bend: 95 mm
Length supply: 100 mts.
Netted PVC transparent hose, food quality.
Temp.: – 10º C y + 60º C.
Meets or exceeds: 2007/19/EC
Ø mm: 8x17
Pressure: 14 bar
Radius bend: 50 mm
Length supply: 40 mts.
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
For:
Inlet Ø: 127 to 130 mm
Outlet Ø: 134 to 155 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
