SAE size: 64
Width band: 90 - 110mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Shipment and delivery
3 and 5 days withing the EU, up to 10 days elsewhere.
Return policy
Can be returned or exchanged, with conditions.
In. Ø: 1-1/2" = 38 mm
Length: 15 m
Pack: Box
Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Not recommended for below waterline thru-hull connections.
Warranty: 1 year
For:
Inlet Ø: 13 to 28 mm
Outlet Ø: 19 to 41 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Ø: 8x15 mm
Radius bend: 50 mm
Length supply: 100 mts.
Rubber hose suitable for delivery of water, non corrosive fluids and air.
Temp.: – 30º C + 80º C.
Working pressure : 10 bars
Burst pressure : 30 bars
Meets or exceeds: ISO R1307.
In. Ø: 3/4" = 19 mm
Length: 15 m
Pack: Box
Extra heavy duty sanitatio hose of smooth white vinyl. Specially compounded to provide resistance to odor penetration and potable water fill. Hard PVC helix gives good flexibility and bend radius.
Operating temperatures: +10ºF to +140ºF.
Ø: 25x35 mm
Radius bend: 50 mm
Length supply: 30,5 mts.
Hardwall smooth cover rubber hose extremly flexible designed as sewage pipe for marine toilets. Its naub advantage is to avoid the spreading of odours from the toilet drains.
Temp.: – 40º C + 120º C.
Working pressure : 7 bars
Burst pressure : 21 bars
Meets or exceeds: CE, FDA, ISO 8099
SAE size: 40
Width band: 50 - 70 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Ø: 19 mm
Pressure: 7 bar
Radius bend: 75 mm
Length supply: 30,5 mts.
Hardwall smooth cover rubber hose very flexible designed as sewage pipe for marine toilets. Limits the spreading of odours from the toilet drains. Inner reinforcement steel wire helix.
Temp.: – 30º C + 80º C
Vacuum : 0.9 bars
Ø: 35x46 mm
Radius bend: 210 mm
Length supply: per meter
Hardwall smooth cover rubber hose, for suction and delivery if water and non corrosive fluids.
Temp.: – 30º C + 80º C.
Working pressure : 10 bars
Burst pressure : 30 bars
Vacuum : 0.9 bars
SAE size: 52
Width band: 70 - 90 mm
Pack: 10 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Ø mm: 60x74
Pressure: 10 bar
Radius bend: 600 mm
Length supply: per meter
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
In. Ø: 3/4" = 19 mm
Length: 15 m
Pack: Box
Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Not recommended for below waterline thru-hull connections.
Warranty: 1 year
Ø: 19x30 mm
Pressure: 10 bar
Radius bend: 190 mm
Length supply: 40 mts.
Softwall rubber hose suitable for hot water and steam mix. Used where an atoxic hose is required. Suitable to scald with steam up to 164ºC.
Temp. – 40º C + 120º C
Burst pressure : 30 bars
Meets or exceeds: DM 21/3/73 - 18/6/79 & FDA
Ø mm: 63,5
Radius bend: 63,5 mm
Length supply: per meter
General purpose hose. Hardwall corrugated cover rubber hose. Extremly flexible. The construction ensures bending radius up to 1 / 1.5 for the inside diameter.
Temp.: – 30º C + 100º C.
Meets or exceeds: SAE J 2006 - 2003 R2 / ISO 13363 - 2004 T-2 Class B.
Approval: Rina n.º 0474 - Lloyd’s n.º 96/00/127
Warranty: 5 years.
Ø: 15x21 mm
Pressure: 8 bar
Radius bend: 75 mm
Length supply: 25 mts.
Ø mm: 51
Pressure: 10 bar
Radius bend: 75 mm
Length supply: per meter
Hardwall corrugated cover rubber hose for diesel, bio-diesel and unloaded fuel.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R2 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
Ø: 25x37 mm
Pressure: 10 bar
Radius bend: 250 mm
Length supply: 40 mts.
Softwall rubber hose suitable for hot water and steam mix. Used where an atoxic hose is required. Suitable to scald with steam up to 164ºC.
Temp. – 40º C + 120º C
Burst pressure : 30 bars
Meets or exceeds: DM 21/3/73 - 18/6/79 & FDA
