Availability: Out of stock
Inner Ø: 4" = 102 mm
Warranty: 10 years
Manufactured in blue silicone rubber.
Max temperature: 350ºF
Marine engine parts and accesories store
Hose SCAMO/SP
€28.98
Tax included
NSP8339
Ø mm: 60
Radius bend: 60 mm
Length supply: per meter
General purpose hose. Hardwall corrugated cover rubber hose. Extremly flexible. The construction ensures bending radius up to 1 / 1.5 for the inside diameter.
Temp.: – 30º C + 100º C.
Meets or exceeds: SAE J 2006 - 2003 R2 / ISO 13363 - 2004 T-2 Class B.
Approval: Rina n.º 0474 - Lloyd’s n.º 96/00/127
Warranty: 5 years.
Shipment and delivery
3 and 5 days withing the EU, up to 10 days elsewhere.
Return policy
Can be returned or exchanged, with conditions.
16 other products in the same category:
Availability: 1 In Stock
Ø: 12x17 mm
Radius bend: 70 mm
Length supply: 100 mts.
Rubber hose suitable for delivery of water, non corrosive fluids and air.
Temp.: – 30º C + 80º C.
Working pressure : 10 bars
Burst pressure : 30 bars
Meets or exceeds: ISO R1307.
Availability: 3 In Stock
Ø: 16x26 mm
Pressure: 10 bar
Radius bend: 160 mm
Length supply: 40 mts.
Softwall rubber hose suitable for hot water and steam mix. Used where an atoxic hose is required. Suitable to scald with steam up to 164ºC.
Temp. – 40º C + 120º C
Burst pressure : 30 bars
Meets or exceeds: DM 21/3/73 - 18/6/79 & FDA
Availability: 101 In Stock
SAE size: 80
Width band: 120 - 140 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Availability: 3 In Stock
In. Ø: 1-1/4" = 32 mm
Length: 15 m
Pack: Box
Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Not recommended for below waterline thru-hull connections.
Warranty: 1 year
Availability: 26 In Stock
For:
Inlet Ø: 105 to 114 mm
Outlet Ø: 121 to 142 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Availability: 46 In Stock
Ø mm: 45x59
Pressure: 10 bar
Radius bend: 450 mm
Length supply: per meter
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.
Availability: 101 In Stock
SAE size: 6
Width band: 8 - 12 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 9 mm.
Availability: 101 In Stock
SAE size: 28
Width band: 32 - 50 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Availability: 75 In Stock
SAE size: 48
Width band: 60 - 80 mm
Pack: 25 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Availability: 11 In Stock
In. Ø: 5/16" = 7,92 mm
Length: 15 m
Pack: Box
Meets or exceeds: SAEJ1527, ISO-8469 Tipe B1 & Certification CE.
Marine fuel hose (distribution and vent) for outboards. Fuel resistant thermoplastic formulation with 2 spiral reinforcement provides excelent bendability and resistance to UV, aging and permeation by all marine fuels (gasoline/petrol and diesel) including alcohol blends.
Availability: 3 In Stock
Ø: 19x25 mm
Pressure: 8 bar
Radius bend: 95 mm
Length supply: 50 mts.
Availability: 5 In Stock
Inner Ø: 1-1/2" = 38 mm
Length: 1' = 30 cms
Warranty: 10 years
Manufactured in blue silicone rubber.
Max temperature: 350ºF
Availability: 16 In Stock
SAE size: --
Width band: 180 - 200 mm
Pack: 5 x Bag
Stainless steel AISI-316 W5 clamps with hexagonal 7 mm. screw
Width band: 12 mm.
Availability: 5 In Stock
Ø mm: 18
Pressure: 6 bar
Aspiration: 0,8 bar
Radius bend: 30 mm
Length supply: 30 mts.
Steel wire PVC transparent hose. For fresh water and food liquids.
Temp.: – 10º C + 60º C.DM 21/3/73 - CEE 90/128.
Availability: 9 In Stock
Ø mm: 19x30
Pressure: 10 bar
Radius bend: 115 mm
Length supply: 20 mts.
Long length rubber hose, suitable for loading diesel, biodiesel and unloaded fuel for marine pleasure craft inboard engines up to 24 m.
Temp.: – 30º C + 100º C.
Burst pressure : 30 bars
Meets or exceeds: SAE J 1527 - 2004 / USCG A1 R1 / ISO 7840 A-1 2004 CE
Approval: Rina CE 0474 / Lloyd’s Register.