Transfer Pump

Ø: 40mm

Capacity head (mts):

0: 120, 5: 110, 10: 85, 12: 80, 15: 55, 20: 25

Dimensions (mm):

A:130, B:37, C:108, D:105, E:76, F:9, G:90, H:175, I:157, L:245, P:2Ax80

Flow: 400 gph /1512 l/h.

Amp: 12V / 8A

Self priming pump used as bilge pump, wash down, etc. Bronze body and rubber impeller.

Connections: Inside 1/2’’Outside 3/4’’

Flow: 26 l/m.

Volt/Amp: 24V / 5,5A

Fuse: 7,5 amp.

Self priming electric pump with bronze gears for transfer liquids. Complete with in-line filter. Brass body with stainless steel shaft and rubber lip seal. Connections: Inner thread 1/2’’ and 16mm hose.

Water puppy type

Pack: 1 x Skinpack

Spare parts for pumps: MARCO & GOLDENSHIP.

Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

Replaces:  164 681 15

Flow rate: 36 l/min

Voltage: 12 / 24 V

Pressure: 3 bar

Ø: 50mm

Capacity head (mts):

0: 230, 5: 210, 10: 175, 12: 155, 15: 140, 20: 100.

Dimensions (mm):

A:160, B:40, C:138, D:125, E:91, F:11, G:120, H:225, I:188, L:298, P:2Ax80

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

Replaces:  164 500 13

Flow rate: 46 l/min

Voltage: 24 V

Pressure: 2 bar

Volts: 24V

Max. Amp: 45A

Racors: 40 mm

Flow: 120 l/m.

Ø: 40mm

Capacity Head (mts)

0: 120, 5: 110, 8: 95, 10: 85, 12: 80, 15: 55, 20: 30.

Dimensions (mm):

A: 140, B: 125, C: 185, D: 67, E: 180, G: 90, H: 175, I: 175, K: 10, L: 490, P: 130, X: 17,5

Flow: 28 l/m

Volts/Amp: 12V / 8A

Dimensions: 152x95x82 mm

ISO 8849

ISO 8846

Self priming water pump with self lubricated flexible impeller. Brass body with stainless steel shaft and ruber lip seal.

Connections: Inner thread 3/8’’ - Outside bore 20mm.

Ø: 25mm

Capacity head (mts):

0: 60, 5: 50, 10: 25, 12: 15, 15: 8, 20: 0

Dimensions (mm):

A:119, B:25, C:80, D:80, E:68, F:6,75, G:63, H:116, I:140, L:195, P:1Ax70

For: NSP7731/32/33/34

Pack: 1 x Skinpack

Spare parts for pumps: MARCO & GOLDENSHIP.

Flow rate: 

6 mm: 20 l/h.

8 mm: 60 l/h.

12 mm: 330 l/h.

Volt/Amp: 24V / 3,5A

Fuse: 4 amp.

Body brass with bronze gear pump, for transfer of lubricating oils or viscous liquids. Stainless steel shaft and rubber lip seal. Includes a kit of tubes 8 and 6 mm.

Flow rate: 30 l/min. / 8,0 gpm.

Volt/Amp: 24V / 5,0A

Fuse: 7,0 amp.

Self priming water pump with self lubricated flexible impeller. Bronze body with stainless steel shaft and ruber lip seal.

Connections: Inner thread 1/2’’

IP67 Control panel for electronic pumps.

ON/OFF, reset and remote control.

Voltage:12 / 24 V

Bore: 70 mm

Dimensions: 80 x 80 x 45 mm

Flow: 15 l/m.

Volt/Amp: 12V / 5,6A

Fuse: 10 amp.

Self priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.

Volts: 12V

Max. Amp: 26A

Racors: 20mm

Flow: 25 l/m.

Ø: 20mm

Capacity Head (mts)

0: 25, 5: 18, 8: 9, 10: 0, 12: 0, 15: 0, 20: 0.

Dimensions (mm):

A: 100, B: 80, C: 100, D: 35, E: 115, G: 63, H: 106, I: 120, K: 7, L: 295, P: 105, X: 12