There are 446 products.
Features: Kit with trim gauge
Electric hydraulic Tilt & Trim with a rated thrust of 7800 lbs. for outboards up to 130 HP. Made with extruded aluminum and stainless steel fasteners.
Travel: Trim = 20º Trim & Tilt = 90º
Set-Back from transom: 6’’
Operation: 12 V.
Length: 8' - 2,45m
Engine control cables. Travel 3". Threaded 10-32
Link arm for outboards steerings.
Stainless steel.
For engines Johson - Evinrude.
Dimensions: 320 - 340 mm.
Pack: 1 x bag
Ø total: 350 mm
Colour: White
Hub: 5/8-3/4’’ = 17 / 19 mm
Manufactured in aluminium and soft polyurethane.
Engine up to: 300HP
Pressure valve: Yes
Pump model: SeaStar
Helm volume: 27,8 cm3
Cylinder model: HC5345H
Cylinder volume: 139 cm3
Cylinder travel: 206 mm
Turns lock to lock: 5
Hose w/racors: 2 x 7 m
Max. speed : 65 knots
Length: 5’ = 1,50m
Rotary steering system: Helm, Steering cable and 90º bezel. Can be used on boats up to 18 ft. in length with engines up to 55 HP. 2,5 turns lock to lock. Travel 230 mm.
Replaces: Yamaha: 703-48205-10, 703-48205-11, 703-48205-12, 703-48205-13, 703-48205-14, 703-48205-15, 703-48205-16, 703-48205-17, 703-48205-18, 703-48205-1A, 703-48205-1B, 703-48205-20, 703-48205-21, 703-48205-23, 7034820510, 7034820511, 7034820512, 7034820513, 7034820514, 7034820515, 7034820516, 7034820517, 7034820518, 703482051A, 703482051B, 7034820520, 7034820521, 7034820523
Retracted: 74 cms
Extended: 104 cms
Stroke: 30 cms
Electromechanical actuator made of non corrosive materials and completely sumersible.
Stainless steel ram.
Up to 750 lbs lift.
Operation: 12V.
For engines from 75 HP and up.
Gives outboards and sterndrives a performance boost. Wipes out cavitation. On plane in less time. Saves fuel. Delivers true stabilization. Reduced hydrodynamic drag. Improved top-end speed. Better fuel eficiency.
PLUS
= NO-DRILL mounting design.
= Sleeker hydrodynamic profile.
= Captive Prop-Wash Resulting In
= Improved Thrust
= Fastest Hole Shot
Length: 14' = 4,25m
Engine control cables. Travel 3". Threaded 10-32.
Electric hydraulic Tilt & Trim with a rated thrust of 7800 lbs. for outboards up to 35 HP. Made with extruded aluminum and stainless steel fasteners.
Set-Back from transom: 5-1/2’’
Total travel: 84º
Operation: 12 V.
