Contactor

Set 18 labels

Applications:

1 = Switches battery bank 1 or battery bank 2 or battery bank 1 and 2 to all loads using one switch.

Features: Selector c/AFD

Pack: 1 x blister

Dimensions: 120x120x48 mm

Pack: 1 x Skinpack

Main battery switch made of polycarbonated housing, copper contacts and brass terminals.

Rating: Continuous: 315 A. - Intermittent: 450 A.

Coil voltage: 12V

Pack: 1 x Blister

Automatically combines large batteries banks for high current charging and isolates under discharge.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Features: Dual Circuit Plus

Pack: 1 x blister

Applications:

1 = Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery.

2 = The COMBINE BATTERIES funcion offers the ability to combine two battery banks in the event of a low battery.

Coil voltage: 24V

Pack: 1 x Blister

Automatically combines large batteries banks for high current charging and isolates under discharge.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Dimensions: 

A: 142 mm

B: 90 mm

Pack: 1 x Skinpack

Double pole battery switch. Silver plated copper contacts.

Removable handle.

Rating: Continuous 24 V - 120 A. - Intermittent: 2000 A. (3 seg.)

Features: 24V

Pack: 1 x Box

Contactor Single Pole, Single Throw.

Rating: 100 A = int. 500 A

Pack: 1 x Skinpack

Single pole battery switch manufactured in black plastic finish with brass electrical contacts.

Rating: Continuous 75 / 100 A. - Intermittent 300 / 500 A.

Dimensions: 133x133x85 mm

Pack: 1 x Skinpack

Battery selector switch made of polycarbonated housing, copper contacts and brass terminals. With alternator field disconnect.

For systems up to 32 V

Rating: Continuous 380 A. - Intermittent 850 A. (5 min.)

Features: Dual circuit

Pack: 1 x Blister

1 = Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch.

2 = Switches circuits of different voltages, such as 12V and 24V simultaneously with one simple ON/OFF switch.

Battery Selector Switch made of reinforced polycarbonated housing.

Tin-platted copper stud terminals. Case design allows panel or surface mounting. Voltage rating: 48V DC maximum.

With alternator field disconnect AFD (BS9004-BS9002-BS5510-BS5511).

Features: ON/OFF Circuit

Pack: 1 X blister

Max. amperage: 12v - 20A // 24v - 15A

Pack: 1 x Blister

Lockout slide reduces the risk of accidental switching.

Battery Selector Switch made of reinforced polycarbonated housing.

Tin-platted copper stud terminals. Case design allows panel or surface mounting. Voltage rating: 48V DC maximum.

With alternator field disconnect AFD (BS9004-BS9002-BS5510-BS5511).

Features: ON/OFF AFD

Pack: 1 X blister

Features: 24V

Pack: 1 x Box

Contactor Single Pole, Single Throw.

Dimensions: 96x96x113 mm

Pack: 1 x Box

Single pole battery switch made of ABS and non-corrosive marine grade metals.

Rating: Continuous 275 A. - Intermittent:455 A.