H.D. Disconnecting Switch

Dimensions: 98x98 mm

Pack: 1 x Blister

Applications:

1 = Switches battery bank 1 or battery bank 2 or battery bank 1and 2 to all loads using one switch.

Coil voltage: 24V

Pack: 1 x Blister

Automatically combines large batteries banks for high current charging and isolates under discharge.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Features: 24V

Pack: 1 x Box

Contactor. Reversing Paired Single Pole Double Throw.

Dimensions:

Distance between holes: 100 mm

Pack: 1 x Skinpack

Single pole battery switch manufactured in brass and high impact plastic. Copper contacts. Removable handle.

For systems up to 24 V.

Rating: Continuous 250 A. - Intermittent 2500 A. (5 seg.)

Dimensions: 96x96x113 mm

Pack: 1 x Box

Single pole battery switch made of ABS and non-corrosive marine grade metals.

Rating: Continuous 275 A. - Intermittent:455 A. 

Battery Selector Switch made of reinforced polycarbonated housing.

Tin-platted copper stud terminals. Case design allows panel or surface mounting. Voltage rating: 48V DC maximum.

With alternator field disconnect AFD (BS9004-BS9002-BS5510-BS5511).

Features: ON/OFF Circuit

Pack: 1 X blister

Features: 24V

Pack: 1 x Box

Contactor Single Pole, Single Throw.

Coil voltage: 12V

Pack: 1 x Blister

Automatically combines large batteries banks for high current charging and isolates under discharge.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Coil voltage: 24V

Pack: 1 x Blister

For use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs. Optional manual switch.

Rating: Continuous: 300 A. - Intermittent: 500 A.

Dimensions: 120x120x48 mm

Pack: 1 x Skinpack

Main battery switch made of polycarbonated housing, copper contacts and brass terminals.

Rating: Continuous: 315 A. - Intermittent: 450 A.

Max. amperage: 12V - 20A // 24V - 15A

Pack: 1 x blister

Lockout slide reduces the risk of accidental switching.

Features: Dual circuit plus

Pack: 1 x Blister

1 = Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery.

2 = The COMBINE BATTERIES function offers the ability to combine two battery banks in the event of a low battery.

Features: Dual circuit

Pack: 1 x Blister

1 = Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch.

2 = Switches circuits of different voltages, such as 12V and 24V simultaneously with one simple ON/OFF switch.

Dimensions: Ø 133 mm x Height 67 mm

Pack: 1 x Skinpack

Battery selector switch made of polycarbonated housing, copper contacts and brass terminals.

For systems up to 32 V

Rating: Continuous 250 A. - Intermittent 360 A.

Removable Handle

Pack: 1 x Skinpack

Single pole battery switch made of polycarbonate and non-corrosive marine grade metals.

Dimensions base: 67 x 67 mm.

Rating: Continuous 250 A. - Intermittent: 350 A.

Made of: Stainless steel

Pack: 1 x Skinpack

Single pole battery switch. Copper contacts. Removable handle.

For systems up to 24 V.

Eexterior Ø 58mm.

Rating: Continuous 150 A - Intermittent 1000 A. (5 seg.)