Shaft Ø: G-30 mm
Stern Tube Ø: 51 mm
There are 6268 products.
Shaft Ø: G-30 mm
Stern Tube Ø: 51 mm
A: 1"
B: 1 1/4"
C: 4"
D: 3/64"
Manufactured in naval brass and rubber.
Measures in inches.
For:
Inlet Ø: 13 to 28 mm
Outlet Ø: 19 to 41 mm
Stainless steel constant torque clamp. 5/8’’ wide band, liner, housing screw and bellville springs. Automatic adjusting for heat, cold & compression set.
Warranty: 3 years.
Thread: 1/2"
Pack: 1 x Bag
Manufactured in brass.
Pump: Ø 38mm / 1-1/2"
Hose: Ø 29mm / 1-1/8"
Hose adapters for pump outlets to hose.
Engine up to: 80HP
Pump model: GM3-MRA
Helm volume: 14 cm³
Cylinder model: MC90B
Cylinder volume: 75 cm³
Cylinder travel: 206 mm
Turns lock to lock: 5,2
Hose with racors: 2 x 5 m.
Tube diameter: 6,3 mm - 1/4"
Thread: 3/8"
Hose: 15mm
Pack: 1 x Bag
Made in stainless steel AISI-316
Thread: 3/8"
Pack: 1 x Bag
Chromed brass case, stainless steel ball and metal handle.
Hose: 25-32-38 mm
Pack: 1 x Skinpack
Polypropilene with a built-in rubber flapper.
Flow: 49,- l/m = 13 gpm.
Volts/Amp: 12V / 14A
Macerator pump specifically designed for sanitation waste.
Port inlet: 1-1/2’’ (38mm) - Outlet: 1’’ (25mm)
"SeaFlow"
Flow: 10,0 l/m = 2,7 gpm.
Volts/Amps: 12V / 3A.
Pressure: 17psi / 1,2bars.
Dimensions: 210x108x99 mm
4 chambers fresh water automatic demand pump for multi fixtures applications. Self priming.
Flow rate:
6 mm: 20 l/h.
8 mm: 60 l/h.
12 mm: 330 l/h.
Volt/Amp: 12V / 6,5A
Fuse: 7,5 amp.
Body brass with bronze gear pump, for transfer of lubricating oils or viscous liquids. Stainless steel shaft and rubber lip seal. Includes a kit of tubes 8 and 6 mm.