Availability: 2 In Stock
Ø: 25mm
Capacity head (mts):
0: 60, 5: 50, 10: 25, 12: 15, 15: 8, 20: 0
Dimensions (mm):
A:119, B:25, C:80, D:80, E:68, F:6,75, G:63, H:116, I:140, L:195, P:1Ax70
Marine engine parts and accesories store
Bilge, Water & Service Pumps
There are 260 products.
Availability: 20 In Stock
Volts: 24V
Max. Amp: 15A
Dimensions: 67x42x42mm
No moving parts & no electrolysis. Activates when water touches lower sensor. Will not interfere with othe electronics. Will not pump a bilge full of gas, diesel or oil.
Delay On: 6-8 seg.
Delay Off: 14-16 seg
Consumption: 0,004 Amps.
Availability: 9 In Stock
Capacity: 1500gph/5677l/h
Volts/Amps: 24V
Hose: 29 mm.
Dimensions: 184 x 95 mm
Base: 154 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: 4 In Stock
"PROBLASTER II - Ultimate"
Flow: 20,1 l/m = 5,3 gpm.
Volts/Amp: 24V / 6A
Pressure: 45psi / 3,1bar
IP-8846
Dimensions: 254x127x120 mm.
4 chambers fresh or salt water automatic demand pump for washdown applications. Self priming.
Built-in check valves.
Availability: Out of stock
Ø: 30mm
Capacity head (mts):
0: 75, 5: 60, 10: 40, 12: 40, 15: 15, 20: 0
Dimensions (mm):
A:130, B:28, C:103, D:85, E:70, F:9, G:90, H:175, I:157, L:218, P:1Ax70
Availability: 2 In Stock
Capacity: 2000gph/7569l/h
Volts/Amps: 12V/10A
Hose: 29 mm.
Dimensions: 184 x 95 mm
Base: 154 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: 2 In Stock
Ø: 40mm
Capacity head (mts):
0: 120, 5: 110, 10: 85, 12: 80, 15: 55, 20: 25
Dimensions (mm):
A:130, B:37, C:108, D:105, E:76, F:9, G:90, H:175, I:157, L:245, P:2Ax80
Availability: 8 In Stock
Capacity: 2000gph/7569l/h
Volts/Amps: 24V
Hose: 29 mm.
Dimensions: 184 x 95 mm
Base: 154 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
