Marine engine parts and accesories store
Bilge, Water & Service Pumps
There are 260 products.
Availability: 13 In Stock
"PROBLASTER II"
Flow: 15,2 l/m = 4,0 gpm.
Volts/Amp: 12V / 10A
Pressure: 45psi / 3,1bar
IP-8846
Dimensions: 254x127x120 mm.
4 chambers fresh or salt water automatic demand pump for washdown applications.
Self priming.Built-in check valves.
Availability: 17 In Stock
Volts: 12V
Max. Amp: 10A
Dimensions: 67x42x42mm
No moving parts & no electrolysis. Activates when water touches lower sensor. Will not interfere with othe electronics. Will not pump a bilge full of gas, diesel or oil.
Delay On: 6-8 seg.
Delay Off: 14-16 seg
Consumption: 0,004 Amps.
Availability: 12 In Stock
Capacity: 1000gph/3785l/h
Volts/Amps: 12V/3,2A
Hose: 29 mm.
Dimensions: 114 x 95 mm
Base: 86 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: Out of stock
Capacity: 800 l/min.
Supply: 220V (750W)
Max. pressure: 190 mbar (2,7 psi).
A.C. inflator/deflator 230V. The revolving handle system allows to control the air flow always constant, even when inflate objets equipped with small valves.
Availability: 3 In Stock
"PROBLASTER II"
Flow: 15,2 l/m = 4,0 gpm.
Volts/Amp: 24V / 5A
Pressure: 45psi / 3,1bar
IP-8846
Dimensions: 254x127x120 mm.
4 chambers fresh or salt water automatic demand pump for washdown applications.
Self priming.Built-in check valves.
Availability: 53 In Stock
Volts: 12V
Max. Amp: 20A
Dimensions: 67x42x42mm
No moving parts & no electrolysis. Activates when water touches lower sensor. Will not interfere with othe electronics. Will not pump a bilge full of gas, diesel or oil.
Delay On: 6-8 seg.
Delay Off: 14-16 seg
Consumption: 0,004 Amps.
Availability: 8 In Stock
Capacity: 1500gph/5677l/h
Volts/Amps: 12V/8A
Hose: 29 mm.
Dimensions: 184 x 95 mm
Base: 154 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: 3 In Stock
"PROBLASTER II - Ultimate"
Flow: 20,1 l/m = 5,3 gpm.
Volts/Amp: 12V / 12A
Pressure: 45psi / 3,1bar
IP-8846
Dimensions: 254x127x120 mm.
4 chambers fresh or salt water automatic demand pump for washdown applications. Self priming.
Built-in check valves.