Availability: 8 In Stock
Volts: 24V
High Water Bilge Alarm. Consist of a float switch and a in-dash gauge with visual and audible 85 db alarm.
Marine engine parts and accesories store
Bilge, Water & Service Pumps
There are 260 products.
Availability: 3 In Stock
Capacity: 380gph/1438l/h
Volts/Amp.: 12V/1,7A
Hose: 19 mm
Dimensions: 114x95 mm
Base: 86 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: 14 In Stock
Colour: Black
Length: 68 cms.
Flow: 0,70 l.
Hand suction pump.
Manufactured in anti-corrosion plastic.
Availability: Out of stock
Flow: 15 l/m.
Volt/Amp: 12V / 5,6A
Fuse: 10 amp.
Self priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.
Availability: 5 In Stock
Volts: 12V
Max. Amp: 15A
Dimensions: 55x35x26mm
Mini electronic bilge pump. Simple installation. Mounts at any angle or pump. Oils and fuels will not activate switch.
Delay On: 6-8 seg.
Delay Off: 14-16 seg
Consumption: 0,004 Amps.
Availability: 7 In Stock
Capacity: 500gph/1983l/h
Volts/Amps: 12V/1,8A
Hose: 19 mm.
Dimensions: 114 x 95 mm
Base: 86 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: 10 In Stock
Capacity: 1000 l/min.
Volts/Amp.: 12V (45-60 amp)
Max. pressure: 250 mb (3,6 psi)
Permanent mounting turbo air station for inflating/deflating the rubber dinghy.
Pressure regulator: 175/250mb.
Availability: 59 In Stock
Length: 55 cms.
Flow: 0,55 l.
Pack: 1 x Bag.
Hand suction pump. Manufactured in anti-corrosion plastic.
Supplied with 80 cms. plastic hose.
Availability: 25 In Stock
Volts: 24V
Max. Amp: 10A
Dimensions: 55x35x26mm
Mini electronic bilge pump. Simple installation. Mounts at any angle or pump. Oils and fuels will not activate switch.
Delay On: 6-8 seg.
Delay Off: 14-16 seg
Consumption: 0,004 Amps.
Availability: 12 In Stock
Capacity: 700gph/2650l/h
Volts/Amps: 12V/3,2A
Hose: 19 mm.
Dimensions: 114 x 95 mm
Base: 86 mm.
ISO 8849
Submersible bilge pump. High density nylon, housing and impeller. Stainless steel shaft. Removable cartridge. Quick snap base.
Availability: Out of stock
Length: 75 cms.
Flow: 0,80 l.
Pack: 1 x Bag.
Hand suction pump. Manufactured in anti-corrosion plastic.
Supplied with 80 cms. plastic hose.